E-Flite Turbo Timber 1.5m BNF

Functions

- Unbelievable Brief Remove and Landing (STOL) plus sport and aerobatic flight abilities
- High-power THREE and FOUR suitable 50A ESC and outrunner motor with 3-blade prop
- Stiffer wing for enhanced aileron authority, roll rates and managing
- Practical slotted flaps for much shorter departures and landings
- 6 long lasting and factory-installed metal-geared servos
- Spektrum™ 6-channel receiver with industry-leading DSMX® innovation
- Unequaled stability and accuracy of AS3X® innovation for smoother flight efficiency
- Easy to fly with optional-use SAFE® Select flight envelope defense
- Shock-absorbing landing equipment with extra-large tundra-style wheels
- Consists of optional-use drifts with steerable rudders for flying from water
- Practical and factory-installed LED landing, navigation and strobe lights
- Lightweight yet long lasting composite-reinforced, hollow-core EPO building and construction
- Optional-use leading edge slats for enhanced STOL and sluggish flight efficiency
- Quick and simple bolt-together assembly- no glue needed

The Turbo Lumber 1.5m is geared up with an unsurpassable mix of functions that make it possible for everybody from low-time to skilled pilots to take pleasure in a flexible STOL and sport flying experience unlike any other. Shock-absorbing landing equipment equipped with extra-large, tundra-style wheels plus the optional-use float set and leading edge slats, practical slotted flaps and the LED light system from the initial are all requirement. Contribute to that a turboprop-styled nose, topped off with a 3-blade prop and spinner that are driven by a more effective THREE and FOUR suitable power system- supported by a stiffer airframe that's geared up with more long lasting and trusted metal-geared servos- and you have boosted efficiency and abilities that make this one of the most enjoyable you can have with a Lumber yet!

What's in package?

(1) E-flite Turbo Lumber 1.5m with:
(1) 50A Brushless ESC (set up)
(1) Brushless Outrunner Motor (set up)
(1) Spektrum™ AR636 6-Channel Receiver (set up)
(6) Micro Metal-Geared Servos (set up)
(1) Set of Optional-Use Leading Edge Slats
(1) Set of Optional-Use Drifts
(1) Item Handbook

- Full-range, 6+ Channel DSMX®/DSM2® transmitter
- 2200- 3200mAh THREE or FOUR 11.1- 14.8V LiPo with EC3™ or IC3™ Adapter (SPMX22003S30 or SPMX22004S30 advised)
- Suitable LiPo battery charger

• Wingspan: 61" (1555mm)
• Total Length: 40.9" (1040mm)
• Wing Location: 559.5 sq in (36.1 sq dm)
• Flying Weight: 57 - 60oz (1.61 - 1.7kg)
• Motor Size: 10 size, 800Kv brushless outrunner
• Radio: 6-channel DSMX/DSM2 needed (offered independently)
• Servos: 9g metal equipment
• CG (center of mass): 2.4" (60mm) +/- 0.20" (5mm) back from the leading edge of the wing determined at the fuselage
• Wing Loading: 13.45 oz sq/ft (14.04 g sq/dm)
• Prop Size: 11x7.5 3-blade
• Speed Control : 50A w/EC3 battery adapter
• Advised Battery: 2200mAh 3 - FOUR LiPo w/EC3 adapter (offered independently)
• Flaps: Complete, 1.4" (35mm), Half, 0.79" (20mm)
• Control Toss (Ailerons): 1.2" (30mm) High / 0.87" (22mm) Low
• Control Toss (Elevator): 0.87" (22mm) High / 0.63" (16mm) Low
• Control Toss (Rudder): 1.4" (35mm) High / 0.98" (25mm) Low
• Transmitter Variety: Complete
• Landing Equipment: Repaired primary LG with steerable tail wheel