Losi Black Rhino Ford Raptor Baja Rey 1/10th 4wd DT RTR

Key Features

• Formally Licensed Ford Body Panels and Trim Schemes
• Over the leading scale information consisting of custom-made body, 4-link suspension and more.
• Dynamite® 3800Kv Brushless Power System
• Long Travel 4-link Live Back Axle
• Long Travel Independent A-Arm Front Suspension
• Easy-Access Motor
• Rear-Loading Battery
• Sealed Metal-Gear Transmission and Diffs
• Coil-over Oil-Filled Shocks
• Water resistant Electronics
• Bolt-On Body Panels and Comprehensive Interior
• LED Light Bar (Front and Rear)
• Aluminum Chassis
• Full-Size Spare Tire
• Spektrum™ DX2E Active™ Radio System
• AVC Traction Control

The Losi® Ford Raptor Baja Rey® is the most genuine looking Desert Truck on the marketplace with the performance and toughness of a race car. Formally licensed, it comes equipped with a Dynamite® 3800Kv brushless power system, along with a solid rear axle, independent front suspension, and roll cage with upright shocks, so you can tear across all types of rocky off-road surface. And you'll do so with the full-throttle freedom that just AVC® innovation can provide. Much like the complete scale Ford Raptor, the onboard traction control enables you to fly across the desert at speeds in excess of 50mph all while in complete control and entirely called in. You get an authentic off-road racing experience with injection formed information, light bars and 2 certified trim schemes. The Ford Raptor Baja Rey has actually simply raised the bar another level.

What's in the Box?

(1) Ford Raptor Baja Rey: 1/10 4WD RTR Desert Truck
(1) Spektrum™ 6-Channel DSMR® AVC Surface area Receiver (installed)
(1) Spektrum™ 9KG 23T Water resistant Servo (set up)
(1) Dynamite® Fuze™ 130A Sensorless Brushless Waterproof ESC (installed)
(1) Dynamite® Fuze™ 550 Brushless Motor 3800Kv (installed)
(1) Spektrum™ DX2E 2.4GHz Transmitter
(4) AA Batteries (for transmitter)
(1) Product Handbook

• 2S or 3S Hardcase LiPo battery with EC3 or IC3 adapter
• Apprioriate LiPo charger

• Type: Desert Truck
• Scale: 1/10
• Length: 21.6" (540mm)
• Width: 12.6" (320mm)
• Height: 7.6" (190mm)
• Ground Clearance: 2.2" (55mm)
• Wheelbase: 14.6" (370mmm)
• Weight: 6.1 pounds (2.8kg)
• Chassis: 0.12" (3mm) thick aluminum
• Suspension: Front, independent, Rear 4-link
• Drivetrain: 4WD Shaft Drive
• Tire Type: Desert Claws, 4.45" (113mm) size
• Motor or Engine: 550 size motor
• Speed Control: Dynamite Fuze 130A
• Radio: Spektrum DX2E transmitter with 6-ch DSMR AVC surface receiver
• Servos: Waterproof metal equipment guiding servo
• Batteries: One 2 or THREE a minimum of 5000mAh hardcase LiPo needed
• Battery charger: LiPo suitable needed
• Gear Pitch: 1.0 Module
• Wheel Size: 2.3" (58.4mm) large, 2.2" (56mm) Outer Size, 3.0" (76mm) Inner Size
• Kit/RTR: RTR
• Shock Type: Oil-filled, front 3.9" (100mm), 4.8" (122mm) rear
• Body: 4 piece screen printed 2018 Ford Raptor accredited body
• Ball Bearings: Full set
• Assembly Time: Less than 1 Hour