Axial Wraith 1.9 1/10th Scale Electric RTR Black

The Axial® Wraith™ 1.9 4x4 is a new, 1/10 scale, ready-to-run platform that delivers it all - technical rock crawling prowess and detailed scale looks. Take the wheel and take command over mud, rocks, sand, and through any kind of backyard terrain!

Features

Strong tube chassis with forward-mounted battery position
Boatsides/skid plate for extra clearance
Chassis-mounted servo for a realistic look
Easy access to electronics, and adjustable battery tray
New body design with LED lights, and grille, radiator, fender, and V8 engine details
Spektrum™ Transmitter and Receiver
Licensed 1.9 Nitto Trail Grappler M/T tires on KMC XD229 Machete crawl wheels
Compact AX10™ transmission
AR44™ hi-pinion axles for added ground clearance
WB8 HD Wildboar™ driveshafts
Dual slipper clutch with 32-pitch gearing

At its foundation the Axial Wraith 1.9 4x4 is the first full tube frame chassis in RC, providing the durability you need for aggressive action on tough terrain. Refining the proven 2.2 Wraith chassis design, Axial improved the ground clearance for this version by reducing the size of its skid plate and lower rails. Boatsides on the skid plate improve handling by helping the vehicle slip through and past obstacles.

Your battery mounts at the front of the chassis, for easy access and to provide the best weight distribution for aggressive climbing. For scale looks, Axial moved the servo off the top of the axle and onto the chassis - just as a full-size truck has its steering box located on the frame.

The Wraith 1.9 truck's drivetrain uses a powerful brushed 540 motor to turn its proven front and rear, single piece AR44™ axles. The pinion gear is 6mm above center, raising the ground clearance and improving driveshaft angles. Axial boosts the overall strength with metal gear construction; large, flex-reducing load bearings; increased gear surface contact; and a gear ratio that's optimized to reduce torque twist.

Adjustable oil-filled, coil over shocks allow you to tune dampening for the best handling on any track. Molded from durable S30 compound, the officially licensed Nitto Grappler tires have a large block tread that gets excellent bite on a wide range of surfaces.

The Wraith 1.9 truck looks ready to climb mountains even when it's standing still. At the front end of its polycarbonate body you'll find a molded plastic grille, radiator detail, and two large, LED-equipped headlights. Raise the hood and you'll see a replica V8 engine tucked in front of the chassis battery mount. That V8 isn't just for show. It's also a rugged receiver box that guards the model's Spektrum™ SRX200 receiver from water, dust, and debris.

The Axial Wraith 1.9 RTR comes factory-assembled and requires only a battery pack with IC3™ connector, compatible battery charger, and four AAs for the included Spektrum 2.4GHz transmitter. It's easy enough for brand-new RC enthusiasts, with the style elegance to take skilled chauffeurs on extraordinary experiences far beyond completion of the road.

What's in package?

(1) Axial Wraith 1.9 1/10 4WD RTR with:
(1) Spektrum™ SRX200 Receiver (set up)
(1) Technique® TSX45 Metal Equipment Servo (set up)
(1) Axial® 35T Electric Motor (set up)
(1) Dynamite® Electronic Speed Control with Drag Brake (set up)
(1) Spektrum™ STX2 Transmitter
(1) Item Handbook

• 2-3 Cell LiPo or 5-9 Cell NiMH/NiCd battery with IC3/EC3 port
• Suitable battery charger
• (4) AA Alkaline batteries

• Type: Spider
• Scale: 1/10
• Length: 17.8" (451.6mm)
• Width: 8.8" (223.3mm)
• Height: 8.8" (223.3mm)
• Ground Clearance: 2.73" (69.4mm)
• Wheepoundase: 12.13" (308mm)
• Weight: 4.65lb (2.1kg)
• Chassis: Complete tube frame built of high-strength effect resistant composite plastic, brand-new chassis style moves battery tray to front for simpler gain access to and much better weight circulation, brand-new lower rails and skid plates are narrower for included clearance
• Suspension: Multi link strong axle 4-link enhanced to minimize axle guide and torque twist
• Drivetrain: 4WD Shaft Drive
• Tire Type: Certified Nitto Grappler, aggressive big block tread style, foam inserts, Installing Bead Size 1.9" (48.2mm), Outer Size 4.7" (119.4mm)
• Motor or Engine: 540 size motor, 35T brush geared up, incorporated cooling fan
• Speed Control: Dynamite AE-5L THREE capable Forward/Reverse with drag brake, switchable in between LiPo & NiMH batteries with a jumper, LED light controller with headlight/ taillight outputs
• Radio: Spektrum FHSS 2.4GHz STX2 2-ch with 3-position throttle limiter, steering & throttle rate and trim modifications, high torque (151 oz-in) water resistant, double ball bearing guiding servo
• Servos: Technique TSX45 high-torque metal equipment double ball bearing guiding servo
• Batteries: One 2-3S LiPo battery w/IC3 port, or one 5-9 cell NiMH battery w/IC3 port needed
• Battery charger: Suitable with chosen battery
• Equipment Pitch: 32-Pitch
• Wheel Size: 2.12" (53.9mm) Size, 1.2" (26mm) Width, 12mm Hex
• Kit/RTR: RTR
• Shock Type: Clear covered refined aluminum body oil-filled King shocks with accuracy machined pistons, pre-load tuning and trip height adjustable
• Body: Formed polycarbonate with plastic grille and formed plastic inner fender wells
• Ball Bearings: Complete set consisted of
• Assembly Time: Less than 1 Hour